一、設備介紹 本凈化器是一款專為工業廢氣專業處理車間因生產產生的煙塵及輕質顆粒而設計的一體化凈化裝置。設備核心部件主要采用活性炭吸附凈化裝置和靜電吸附，既能有效去除廢氣中的有害物質和污染顆粒等，又能降解各種異味和各種含金屬加工廠生產出的有毒有害氣體。二、工作原理 設備有進氣口和出氣口兩端。需生產廢氣經進氣口進入中效過濾網板內，煙塵廢氣中的部分煙塵或顆粒先有過濾網板過濾攔截，而后煙塵廢氣進入板框式一級蜂窩活性炭過濾器進行初效過濾及吸附。此時，大部分的大顆粒較重的粉塵被過濾至板框過濾器表面，其他含有細微顆粒的異味型氣體從板框過濾器的內表面經活性炭層層過濾后由另一外表面排出，匯合后進入板框式二級蜂窩活性炭過濾器進行高效過濾、吸附及深度凈化。此時，大部分的微小顆粒及粉塵被過濾至板框過濾器表面，未處理完的異味性氣體從板框過濾器的內表面經活性炭層層過濾后由另一外表面排出至出風口。板框式活性炭過濾器采用二級串聯處理方式，有效的擴大了廢氣同活性炭接觸面積的同時很大程度的提高了廢氣吸附及凈化效果，再由高壓靜電吸附進行處理。設備內部的初效過濾網板固定在設備的進風口位置，板框過濾器采用抽屜式設計，同時設有檢修門，打開可清理、清洗或更換板框過濾器。板框過濾器安裝在特制的框架上，由若干活性炭蜂窩海綿組成一個過濾單元，形成多級凈化單元，再由若干單元拼裝成化學過濾段。板框過濾器的金屬殼體采用金屬材質，可以重復使用，這種設計大大降低了用戶的運行費用。三、應用范圍 廣泛應用于化工、電子、金屬加工、煙草、玻璃、制藥、食品加工、凈化室等因生產產生的廢氣或不銹鋼及管道加工、鋁等金屬焊接時產生的含鉛、錫等煙氣、廢氣或粉塵或煙霧處理場所。1. Introduction of equipmentThe purifier is an integrated purification device specially designed for industrial waste gas to deal with smoke and light particles produced in workshop. The core components of the equipment are mainly activated carbon adsorption purification device and electrostatic adsorption, which can effectively remove the harmful substances and pollution particles in the waste gas, and can also degrade various odor and all kinds of toxic and harmful gases produced by various metal processing plants.Two. The principle of workThe equipment has air intake and air outlet ends. The exhaust gas is required to enter the medium effect filter plate through the intake air inlet, and some of the dust or particles in the smoke and dust exhaust are first filtered and intercepted, and the smoke and dust gas enters the first stage honeycomb activated carbon filter of the plate frame to carry out the initial filtration and adsorption. At this time, most of the heavier particles are filtered to the surface of the plate frame filter, and the other odor gas containing fine particles is filtered from the outer surface of the inner surface of the plate frame filter through the activated carbon layer and then into the plate frame type two stage honeycomb activated carbon filter for efficient filtration, adsorption and depth. Purify. At this time, most of the tiny particles and dust are filtered to the surface of the plate frame filter, and the untreated odor gas is filtered from the other surface to the outlet from the outer surface of the inner surface of the plate frame filter. The plate frame type activated carbon filter has two stages in series treatment, which effectively expands the contact area of the exhaust gas to the activated carbon, and greatly improves the effect of the adsorption and purification of the exhaust gas, and then the high voltage electrostatic adsorption is used to deal with it.The initial filtering net plate inside the equipment is fixed in the air inlet position of the equipment. The plate frame filter adopts the drawer style design, and the repair door is set up at the same time, and the plate frame filter can be cleaned, cleaned or replaced. The plate frame filter is installed on the special frame, which consists of a number of activated carbon honeycomb sponges to form a filter unit, forming a multi-level purification unit, and then assembled into a chemical filter section by a number of units. The metal shell of the frame filter is made of metal material and can be reused. This design greatly reduces the operation cost of the user.Three. Application scopeIt is widely used in chemical, electronic, metal processing, tobacco, glass, pharmaceutical, food processing, purification room and other products produced by the production of exhaust gas or stainless steel and pipe processing, aluminum and other metal welding of lead, tin and other flue gas, waste gas or dust or smoke treatment places.
一、設備介紹 本凈化器是一款專為工業廢氣專業處理車間因生產產生的煙塵及輕質顆粒而設計的一體化凈化裝置。設備核心部件主要采用活性炭吸附凈化裝置和靜電吸附，既能有效去除廢氣中的有害物質和污染顆粒等，又能降解各種異味和各種含金屬加工廠生產出的有毒有害氣體。二、工作原理 設備有進氣口和出氣口兩端。需生產廢氣經進氣口進入中效過濾網板內，煙塵廢氣中的部分煙塵或顆粒先有過濾網板過濾攔截，而后煙塵廢氣進入板框式一級蜂窩活性炭過濾器進行初效過濾及吸附。此時，大部分的大顆粒較重的粉塵被過濾至板框過濾器表面，其他含有細微顆粒的異味型氣體從板框過濾器的內表面經活性炭層層過濾后由另一外表面排出，匯合后進入板框式二級蜂窩活性炭過濾器進行高效過濾、吸附及深度凈化。此時，大部分的微小顆粒及粉塵被過濾至板框過濾器表面，未處理完的異味性氣體從板框過濾器的內表面經活性炭層層過濾后由另一外表面排出至出風口。板框式活性炭過濾器采用二級串聯處理方式，有效的擴大了廢氣同活性炭接觸面積的同時很大程度的提高了廢氣吸附及凈化效果，再由高壓靜電吸附進行處理。設備內部的初效過濾網板固定在設備的進風口位置，板框過濾器采用抽屜式設計，同時設有檢修門，打開可清理、清洗或更換板框過濾器。板框過濾器安裝在特制的框架上，由若干活性炭蜂窩海綿組成一個過濾單元，形成多級凈化單元，再由若干單元拼裝成化學過濾段。板框過濾器的金屬殼體采用金屬材質，可以重復使用，這種設計大大降低了用戶的運行費用。三、應用范圍 廣泛應用于化工、電子、金屬加工、煙草、玻璃、制藥、食品加工、凈化室等因生產產生的廢氣或不銹鋼及管道加工、鋁等金屬焊接時產生的含鉛、錫等煙氣、廢氣或粉塵或煙霧處理場所。1. Introduction of equipmentThe purifier is an integrated purification device specially designed for industrial waste gas to deal with smoke and light particles produced in workshop. The core components of the equipment are mainly activated carbon adsorption purification device and electrostatic adsorption, which can effectively remove the harmful substances and pollution particles in the waste gas, and can also degrade various odor and all kinds of toxic and harmful gases produced by various metal processing plants.Two. The principle of workThe equipment has air intake and air outlet ends. The exhaust gas is required to enter the medium effect filter plate through the intake air inlet, and some of the dust or particles in the smoke and dust exhaust are first filtered and intercepted, and the smoke and dust gas enters the first stage honeycomb activated carbon filter of the plate frame to carry out the initial filtration and adsorption. At this time, most of the heavier particles are filtered to the surface of the plate frame filter, and the other odor gas containing fine particles is filtered from the outer surface of the inner surface of the plate frame filter through the activated carbon layer and then into the plate frame type two stage honeycomb activated carbon filter for efficient filtration, adsorption and depth. Purify. At this time, most of the tiny particles and dust are filtered to the surface of the plate frame filter, and the untreated odor gas is filtered from the other surface to the outlet from the outer surface of the inner surface of the plate frame filter. The plate frame type activated carbon filter has two stages in series treatment, which effectively expands the contact area of the exhaust gas to the activated carbon, and greatly improves the effect of the adsorption and purification of the exhaust gas, and then the high voltage electrostatic adsorption is used to deal with it.The initial filtering net plate inside the equipment is fixed in the air inlet position of the equipment. The plate frame filter adopts the drawer style design, and the repair door is set up at the same time, and the plate frame filter can be cleaned, cleaned or replaced. The plate frame filter is installed on the special frame, which consists of a number of activated carbon honeycomb sponges to form a filter unit, forming a multi-level purification unit, and then assembled into a chemical filter section by a number of units. The metal shell of the frame filter is made of metal material and can be reused. This design greatly reduces the operation cost of the user.Three. Application scopeIt is widely used in chemical, electronic, metal processing, tobacco, glass, pharmaceutical, food processing, purification room and other products produced by the production of exhaust gas or stainless steel and pipe processing, aluminum and other metal welding of lead, tin and other flue gas, waste gas or dust or smoke treatment places.
一、設備介紹 本凈化器是一款專為工業廢氣專業處理車間因生產產生的煙塵及輕質顆粒而設計的一體化凈化裝置。設備核心部件主要采用活性炭吸附凈化裝置和靜電吸附，既能有效去除廢氣中的有害物質和污染顆粒等，又能降解各種異味和各種含金屬加工廠生產出的有毒有害氣體。二、工作原理 設備有進氣口和出氣口兩端。需生產廢氣經進氣口進入中效過濾網板內，煙塵廢氣中的部分煙塵或顆粒先有過濾網板過濾攔截，而后煙塵廢氣進入板框式一級蜂窩活性炭過濾器進行初效過濾及吸附。此時，大部分的大顆粒較重的粉塵被過濾至板框過濾器表面，其他含有細微顆粒的異味型氣體從板框過濾器的內表面經活性炭層層過濾后由另一外表面排出，匯合后進入板框式二級蜂窩活性炭過濾器進行高效過濾、吸附及深度凈化。此時，大部分的微小顆粒及粉塵被過濾至板框過濾器表面，未處理完的異味性氣體從板框過濾器的內表面經活性炭層層過濾后由另一外表面排出至出風口。板框式活性炭過濾器采用二級串聯處理方式，有效的擴大了廢氣同活性炭接觸面積的同時很大程度的提高了廢氣吸附及凈化效果，再由高壓靜電吸附進行處理。設備內部的初效過濾網板固定在設備的進風口位置，板框過濾器采用抽屜式設計，同時設有檢修門，打開可清理、清洗或更換板框過濾器。板框過濾器安裝在特制的框架上，由若干活性炭蜂窩海綿組成一個過濾單元，形成多級凈化單元，再由若干單元拼裝成化學過濾段。板框過濾器的金屬殼體采用金屬材質，可以重復使用，這種設計大大降低了用戶的運行費用。三、應用范圍 廣泛應用于化工、電子、金屬加工、煙草、玻璃、制藥、食品加工、凈化室等因生產產生的廢氣或不銹鋼及管道加工、鋁等金屬焊接時產生的含鉛、錫等煙氣、廢氣或粉塵或煙霧處理場所。1. Introduction of equipmentThe purifier is an integrated purification device specially designed for industrial waste gas to deal with smoke and light particles produced in workshop. The core components of the equipment are mainly activated carbon adsorption purification device and electrostatic adsorption, which can effectively remove the harmful substances and pollution particles in the waste gas, and can also degrade various odor and all kinds of toxic and harmful gases produced by various metal processing plants.Two. The principle of workThe equipment has air intake and air outlet ends. The exhaust gas is required to enter the medium effect filter plate through the intake air inlet, and some of the dust or particles in the smoke and dust exhaust are first filtered and intercepted, and the smoke and dust gas enters the first stage honeycomb activated carbon filter of the plate frame to carry out the initial filtration and adsorption. At this time, most of the heavier particles are filtered to the surface of the plate frame filter, and the other odor gas containing fine particles is filtered from the outer surface of the inner surface of the plate frame filter through the activated carbon layer and then into the plate frame type two stage honeycomb activated carbon filter for efficient filtration, adsorption and depth. Purify. At this time, most of the tiny particles and dust are filtered to the surface of the plate frame filter, and the untreated odor gas is filtered from the other surface to the outlet from the outer surface of the inner surface of the plate frame filter. The plate frame type activated carbon filter has two stages in series treatment, which effectively expands the contact area of the exhaust gas to the activated carbon, and greatly improves the effect of the adsorption and purification of the exhaust gas, and then the high voltage electrostatic adsorption is used to deal with it.The initial filtering net plate inside the equipment is fixed in the air inlet position of the equipment. The plate frame filter adopts the drawer style design, and the repair door is set up at the same time, and the plate frame filter can be cleaned, cleaned or replaced. The plate frame filter is installed on the special frame, which consists of a number of activated carbon honeycomb sponges to form a filter unit, forming a multi-level purification unit, and then assembled into a chemical filter section by a number of units. The metal shell of the frame filter is made of metal material and can be reused. This design greatly reduces the operation cost of the user.Three. Application scopeIt is widely used in chemical, electronic, metal processing, tobacco, glass, pharmaceutical, food processing, purification room and other products produced by the production of exhaust gas or stainless steel and pipe processing, aluminum and other metal welding of lead, tin and other flue gas, waste gas or dust or smoke treatment places.
一、設備介紹 本凈化器是一款專為工業廢氣專業處理車間因生產產生的煙塵及輕質顆粒而設計的一體化凈化裝置。設備核心部件主要采用光氧裝置或水濕式，既能有效去除廢氣中的有害物質和污染顆粒等，又能降解各種異味和各種含金屬加工廠生產出的有毒有害氣體。二、工作原理 廢氣在引風機的負壓作用下先進入光氧裝置，光氧主要利用特制的高能高臭氧UV紫外線光束照射廢氣，裂解工業廢氣如：氨、三甲胺、硫化氫、甲硫氫、甲硫醇、甲硫醚、乙酸丁酯、乙酸乙酯、二甲二硫、二硫化 碳和苯乙烯、硫化物H2S,VOC類、苯、甲苯、二甲苯的分子鏈結構，使有機或無機高分子惡臭化合物的分子鏈在高能紫外線的光束的照射下降解轉變成低分子 化合物，利用高能高臭氧UV紫外線光束分解空氣中的氧分子及水分子產生游離氧（活性氧）和OH自由基，因游離氧和所攜正負電子不平衡所以需與氧分子結合，進而產生臭氧。眾所周知臭氧對有機物具有極強的氧化作用，對工業廢氣及其它刺激性異味有立竿見影的清除效果。進入高效填料塔。在填料塔的上端，噴頭噴出吸收液均勻分布在填料上,廢氣與吸收液在填料表面上充分接觸，發生反應。廢氣中的易溶于水的HCL、NO2、NH3等酸性物質幾乎全被溶解在吸收液里，并與吸收液反應，生成無害的鹽類和水，從而達到凈化廢氣的目的。凈化后的氣體會飽含水份，經過塔頂的除霧裝置去除水份后直接排放到大氣中。吸收液根據污染物性質配制，可循環使用。三、應用范圍 廣泛應用于化工、電子、金屬加工、煙草、玻璃、制藥、食品加工、凈化室等因生產產生的廢氣或不銹鋼及管道加工、鋁等金屬焊接時產生的含鉛、錫等煙氣、廢氣或粉塵或煙霧處理場所。One、Equipment introductionThe purifier is an integrated purification device specially designed for industrial waste gas to deal with smoke and light particles produced in workshop. The core components of the equipment are mainly using the light oxygen device or water wet type, which can effectively remove the harmful substances and pollution particles in the waste gas, but also can degrade various odor and all kinds of toxic and harmful gases produced by various metal processing plants.Two、Working principleThe exhaust gas is first entered into the oxygen device under the negative pressure of the fan. The light oxygen is mainly irradiated by the special high-energy and high ozone UV ultraviolet light beam. The pyrolysis industrial waste gases such as ammonia, trimethylamine, hydrogen sulfide, methyl thiohydrin, methionyl alcohol, methionine, butyl acetate, ethyl acetate, two a, two sulfur, carbon disulfide and styrene are used. The molecular chain structure of sulfides H2S, VOC, benzene, toluene and xylene makes the molecular chain of organic or inorganic polymer odour compounds decompose into low molecular compounds under the irradiation of high energy ultraviolet light, and uses high energy high ozone UV ultraviolet light to decompose oxygen molecules and water molecules in the air to produce free oxygen (activity). Oxygen and OH radicals, due to the imbalance of free oxygen and positive and negative electrons, need to combine with oxygen molecules to produce ozone. As we all know, ozone has a strong oxidation effect on organic compounds, and has instant effect on industrial waste gas and other irritating odors. Enter the high efficient packing tower. At the upper end of the packed column, the nozzle sprays out the absorption liquid evenly distributed on the packing, and the exhaust gas and the absorption liquid are fully contacted on the surface of the packing, and react. The acidic substances, such as HCL, NO2 and NH3, which are soluble in water, are almost completely dissolved in the absorption liquid and react with the absorption liquid to produce harmless salt and water, thus the purpose of purifying the waste gas is achieved. The purified gas will be full of moisture and will be discharged into the atmosphere directly after removing the moisture from the mist eliminator at the top of the tower. The absorption liquid is prepared according to the nature of pollutants and can be recycled.Three、The scope of applicationIt is widely used in chemical, electronic, metal processing, tobacco, glass, pharmaceutical, food processing, purification room and other products produced by the production of exhaust gas or stainless steel and pipe processing, aluminum and other metal welding of lead, tin and other flue gas, waste gas or dust or smoke treatment places.
一、設備介紹 本凈化器是一款專為工業廢氣專業處理車間因生產產生的煙塵及輕質顆粒而設計的一體化凈化裝置。設備核心部件主要采用活性炭吸附凈化裝置和靜電吸附，既能有效去除廢氣中的有害物質和污染顆粒等，又能降解各種異味和各種含金屬加工廠生產出的有毒有害氣體。二、工作原理 設備有進氣口和出氣口兩端。需生產廢氣經進氣口進入中效過濾網板內，煙塵廢氣中的部分煙塵或顆粒先有過濾網板過濾攔截，而后煙塵廢氣進入板框式一級蜂窩活性炭過濾器進行初效過濾及吸附。此時，大部分的大顆粒較重的粉塵被過濾至板框過濾器表面，其他含有細微顆粒的異味型氣體從板框過濾器的內表面經活性炭層層過濾后由另一外表面排出，匯合后進入板框式二級蜂窩活性炭過濾器進行高效過濾、吸附及深度凈化。此時，大部分的微小顆粒及粉塵被過濾至板框過濾器表面，未處理完的異味性氣體從板框過濾器的內表面經活性炭層層過濾后由另一外表面排出至出風口。板框式活性炭過濾器采用二級串聯處理方式，有效的擴大了廢氣同活性炭接觸面積的同時很大程度的提高了廢氣吸附及凈化效果，再由高壓靜電吸附進行處理。設備內部的初效過濾網板固定在設備的進風口位置，板框過濾器采用抽屜式設計，同時設有檢修門，打開可清理、清洗或更換板框過濾器。板框過濾器安裝在特制的框架上，由若干活性炭蜂窩海綿組成一個過濾單元，形成多級凈化單元，再由若干單元拼裝成化學過濾段。板框過濾器的金屬殼體采用金屬材質，可以重復使用，這種設計大大降低了用戶的運行費用。三、應用范圍 廣泛應用于化工、電子、金屬加工、煙草、玻璃、制藥、食品加工、凈化室等因生產產生的廢氣或不銹鋼及管道加工、鋁等金屬焊接時產生的含鉛、錫等煙氣、廢氣或粉塵或煙霧處理場所。One、Equipment introductionThe purifier is a specially designed for the professional integration of industrial waste gasprocessing workshop because of dust generated in the production and design of light particles andpurifying device. The core components of equipment mainly uses active carbon purifying deviceand electrostatic adsorption, which can effectively remove harmful substances in exhaust gas andparticulate pollution, but also can degrade various peculiar smell and poisonous and harmful gascontaining various metal processing plant to produce.Two、Working principleThe device has an air inlet and an air outlet ends. Production exhaust gas by the effect of filter screen of the inlet into the inner part of the dust, the dust and waste gas or particle to filter screen filtering to intercept, and then the dust and waste gas into the early effect of filtration and adsorption of plate and frame type level honeycomb activated carbon filter. At this time, most of thebig dust particles heavier by filtering to filter surface, odor gas other containing fine particles from the inner surface of the plate and frame filter with active carbon and filtered by another outersurface discharge, after merging into the plate and frame type two stage honeycomb activated carbon filter for efficient filtration, adsorption and depth purification. At this time, tiny particles and dust filter to filter most of the surface, the peculiar smell gas incomplete from the inner surface of the plate and frame filter with active carbon and filtered by another outer surface is discharged to the air outlet. Frame type activated carbon filter treated by two - stage in series, the effective expansion of the gas in contact with activated carbon area at the same time, greatly improves theexhaust gas adsorption and purification effect, and finally a high-voltage electrostatic adsorptiontreatment.Equipment inside a primary filter screen is fixed on the air inlet position of equipment, plate and frame filter adopts the drawer type design, with the access door at the same time, open the can clean, clean or replace the filter. Plate and frame filter is installed in a special frame, a filtering unit is composed of a plurality of activated carbon honeycomb sponge, formed multi-stage purificationunit, and then a plurality of unit assembled into chemical filter section. The metal shell plate and frame filter is made of metal materials, can be repeatedly used, the design can greatly reduce theuser's operating costs.Three、The scope of applicationHave widely used in chemical industry, electronics, metal processing, tobacco, glass,pharmaceutical, food processing, purifying rooms for the production of exhaust gas generated or stainless steel and pipe processing, aluminum and other metal welding lead, tin and other flue gas,exhaust gas or dust or fumes disposal sites.
一、設備介紹 本凈化器是一款專為工業廢氣專業處理車間因生產產生的煙塵及輕質顆粒而設計的一體化凈化裝置。設備核心部件主要采用活性炭吸附凈化裝置和靜電吸附，既能有效去除廢氣中的有害物質和污染顆粒等，又能降解各種異味和各種含金屬加工廠生產出的有毒有害氣體。二、工作原理 設備有進氣口和出氣口兩端。需生產廢氣經進氣口進入中效過濾網板內，煙塵廢氣中的部分煙塵或顆粒先有過濾網板過濾攔截，而后煙塵廢氣進入板框式一級蜂窩活性炭過濾器進行初效過濾及吸附。此時，大部分的大顆粒較重的粉塵被過濾至板框過濾器表面，其他含有細微顆粒的異味型氣體從板框過濾器的內表面經活性炭層層過濾后由另一外表面排出，匯合后進入板框式二級蜂窩活性炭過濾器進行高效過濾、吸附及深度凈化。此時，大部分的微小顆粒及粉塵被過濾至板框過濾器表面，未處理完的異味性氣體從板框過濾器的內表面經活性炭層層過濾后由另一外表面排出至出風口。板框式活性炭過濾器采用二級串聯處理方式，有效的擴大了廢氣同活性炭接觸面積的同時很大程度的提高了廢氣吸附及凈化效果，再由高壓靜電吸附進行處理。設備內部的初效過濾網板固定在設備的進風口位置，板框過濾器采用抽屜式設計，同時設有檢修門，打開可清理、清洗或更換板框過濾器。板框過濾器安裝在特制的框架上，由若干活性炭蜂窩海綿組成一個過濾單元，形成多級凈化單元，再由若干單元拼裝成化學過濾段。板框過濾器的金屬殼體采用金屬材質，可以重復使用，這種設計大大降低了用戶的運行費用。三、應用范圍 廣泛應用于化工、電子、金屬加工、煙草、玻璃、制藥、食品加工、凈化室等因生產產生的廢氣或不銹鋼及管道加工、鋁等金屬焊接時產生的含鉛、錫等煙氣、廢氣或粉塵或煙霧處理場所。One、Equipment introductionThe purifier is a specially designed for the professional integration of industrial waste gasprocessing workshop because of dust generated in the production and design of light particles andpurifying device. The core components of equipment mainly uses active carbon purifying deviceand electrostatic adsorption, which can effectively remove harmful substances in exhaust gas andparticulate pollution, but also can degrade various peculiar smell and poisonous and harmful gascontaining various metal processing plant to produce.Two、Working principleThe device has an air inlet and an air outlet ends. Production exhaust gas by the effect of filter screen of the inlet into the inner part of the dust, the dust and waste gas or particle to filter screen filtering to intercept, and then the dust and waste gas into the early effect of filtration and adsorption of plate and frame type level honeycomb activated carbon filter. At this time, most of thebig dust particles heavier by filtering to filter surface, odor gas other containing fine particles from the inner surface of the plate and frame filter with active carbon and filtered by another outersurface discharge, after merging into the plate and frame type two stage honeycomb activated carbon filter for efficient filtration, adsorption and depth purification. At this time, tiny particles and dust filter to filter most of the surface, the peculiar smell gas incomplete from the inner surface of the plate and frame filter with active carbon and filtered by another outer surface is discharged to the air outlet. Frame type activated carbon filter treated by two - stage in series, the effective expansion of the gas in contact with activated carbon area at the same time, greatly improves theexhaust gas adsorption and purification effect, and finally a high-voltage electrostatic adsorptiontreatment.Equipment inside a primary filter screen is fixed on the air inlet position of equipment, plate and frame filter adopts the drawer type design, with the access door at the same time, open the can clean, clean or replace the filter. Plate and frame filter is installed in a special frame, a filtering unit is composed of a plurality of activated carbon honeycomb sponge, formed multi-stage purificationunit, and then a plurality of unit assembled into chemical filter section. The metal shell plate and frame filter is made of metal materials, can be repeatedly used, the design can greatly reduce theuser's operating costs.Three、The scope of applicationHave widely used in chemical industry, electronics, metal processing, tobacco, glass,pharmaceutical, food processing, purifying rooms for the production of exhaust gas generated or stainless steel and pipe processing, aluminum and other metal welding lead, tin and other flue gas,exhaust gas or dust or fumes disposal sites.
滬公網安備 31011702001367號